DESCRIPTION
K220A24101 is a 2.2 inch lcd display screen with optional resistive touch screen and capacitive touch screen control with a resolution of 176×220 pixels. This size TFT LCD display is portrait mode with wider viewing angle by POL adjustment, left: 45/right: 45/up: 45/down: 20 degrees (typical).Optional RTP or CTP.
This K220A24101 module has built-in ILI9225G controller IC, supports MCU interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 380 nits (typ), and the contrast ratio is 800:1. This module is a handheld device, home Ideal for industries such as electrical appliances. The module can operate at temperatures from -20°C to +70°C; its storage temperature range is -30°C to +80°C.
DRAWING
SPECIFICATIONS
General Specifications – 2.2 inch lcd display
| Item | Contents | Unit |
| Size | 2.2 | inch |
| LCM Dimension | 40.20（W）* 55.60（H） * 2.35(T) | mm |
| LCD Active Area | 34.85* 43.56 | mm |
| Number Of Dots | 176×220 | pixel |
| LCD Type | a-Si TFT | |
| Viewing Direction | 12 o’clock | |
| Driver IC | ILI9225G | |
| Interface Type | MCU | |
| Operating Temperature | -20℃~ 70℃ | |
| Storage Temperature | -30℃~ 80℃ | |
| Backlight Type | 4 LEDs | |
| Brightness | 390 | cd/m2 |
LCM PIN Definition
| NO. | Symbol | Description |
| 1 | GND | Ground |
| 2 | VDD | POWER SUPPLY |
| 3 | RESET | Reset pin |
| 4 | CS | Chip enable, Low-active. |
| 5 | RS | Data/Command register address. |
| 6 | WR | Write signal, rising-edge-trigger. |
| 7 | RD | Read signal, rising-edge-active. |
| 8 | IM0 | I/O choose |
| 9 | GND | Ground |
| 10 | VDD | POWER SUPPLY |
| 11 | DB8 | Data Bus |
| 12 | DB9 | Data Bus |
| 13 | DB10 | Data Bus |
| 14 | DB11 | Data Bus |
| 15 | DB12 | Data Bus |
| 16 | DB13 | Data Bus |
| 17 | DB14 | Data Bus |
| 18 | DB15 | Data Bus |
| 19 | GND | Ground |
| 20 | GND | Ground |
| 21 | LEDK3 | BACKLIGHT CATHODE |
| 22 | LEDK2 | BACKLIGHT CATHODE |
| 23 | LEDK1 | BACKLIGHT CATHODE |
| 24 | LEDA | BACKLIGHT ANODE |
DC Characteristics
| Item | Symbol | Min | Typ | Max | Unit |
| TFT gate on voltage | VGH | — | 15 | — | V |
| TFT gate off voltage | VGL | — | -7.5 | — | V |
| TFT common electrode Voltage | Vcom | — | -1 | — | V |
Typical Operation Conditions
| Item | Symbol | Min. | Typ. | Max. | Unit |
| Analog Supply Voltage | VCI | 2.5 | 2.8 | 3.3 | V |
| Digital Supply Voltage | VDD | 2.5 | 2.8 | 3.3 | V |
| I/O Supply Voltage | IOVCC | 1.65 | 1.8/2.8 | 3.3 | V |
| Input High Voltage | VIH | 0.8*IOVCC | – | IOVCC | V |
| Input Low Voltage | VIL | 0 | – | 0.2*IOVCC | V |
| Output High Voltage | VOH | 0.8*IOVCC | – | – | V |
| Output Low Voltage | VOL | – | – | 0.2*IOVCC | V |
Backlight Circuit Characteristics
| Item | Symbol | Min. | Typ. | Max. | Unit |
| LED Current | IB | — | 60 | 80 | mA |
| LED Voltage | Vf | 2.8 | 3.0 | 3.2 | V |
| CIE | X | 0.265 | 0.295 | 0.325 | |
| Y | 0.26 | 0.29 | 0.32 | ||
| Brightness of LCM | L | — | 390 | — | cd/m2 |
Reliability Test Items
| Test Item | Test Condition | Test result determinant gist |
| High temperature storage | 80±3 ℃，48H； | |
| Low temperature storage | ~30±3 ℃，48H； | |
| High temperature storage | 70±3 ℃，48H； | Inspection after 2~4hours storage at roomtemperature, |
| Low temperature operation | ~20±3 ℃，48H； | the sample shall be free from defects: |
| High temperaturehumi/dity | 60℃±3 ℃,90%±3%RH ，48H； | 1.Air bubble in the LCD; |
| Thermal Shock | ~20℃/0.5h~+70℃/0.5h for a total 24 cycles； | 2.Non-display; |
|
Vibration Test | Frequency 10Hz~55Hz~10Hz | 3.Glass crack; |
| Amplitude：1.5mm, X，Y，Z | ||
| direction for total 1H； | 4. The electrical | |
| (Packing condition) | ||
| ESD test | ±4KV, Human Body Mode, | characteristics requirements shall be satisfied. |
| 150pF/330Ω； | ||
| ±8KV, Air Mode, 150pF/330Ω； |
Search keyword: tft 2.2″, 2.2 tft lcd, 2.2″ tft lcd, 2.2 inch tft lcd, tft lcd 2.2, 2.2 tft display, 2.2″ tft display, 2.2 inch tft display, tft display 2.2, tft display 2.2″,tft lcd display,2.2inch lcd screen,2.2inch display screen,
