DESCRIPTION
HC-154HI2402 is a 1.54 inch tft lcd display with an optional resistive touch screen and capacitive touch screen control with a resolution of 240×240 pixels. This small size TFT LCD is in portrait mode, the TFT panel adopts an IPS panel, left: 80/right: 80/up: 80/down: 80 degrees.Optional RTP or CTP.
This HC-154HI2402 inch module has built-in ST7789V controller IC, supports SPI interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 390 nits (typ), and the contrast ratio is 800:1. This module is the industrial ideal choice for POS machines, instrumentation, etc. The module can operate from -20°C to +70°C; its storage temperature range is -30°C to +80°C.
DRAWING of 1.54 inch tft lcd
SPECIFICATIONS
General Specifications – 1.54 inch tft lcd
| Item | Contents | Unit |
| Size | 1.54 | inch |
| LCM Dimension | 31.52（W）* 33.72（H） *1.90(T) | mm |
| LCD Active Area | 27.72* 27.72 | mm |
| Number Of Dots | 240×240 | pixel |
| LCD Type | a-Si TFT | |
| Viewing Direction | IPS | |
| Driver IC | ST7789V | |
| Interface Type | SPI | |
| Operating Temperature | -20℃~ 70℃ | |
| Storage Temperature | -30℃~ 80℃ | |
| Backlight Type | 3 LEDs | |
| Brightness | 390 | cd/m2 |
Interface
LCM PIN Definition
| NO. | Symbol | Description |
| 1 | LEDK | BACKLIGHT CATHODE |
| 2 | LEDK | BACKLIGHT CATHODE |
| 3 | GND | Ground |
| 4 | GND | Ground |
| 5 | TE | Frame mark. |
| 6 | SDA | Serial Data Input |
| 7 | AO | Destination register selection. |
| 8 | SCL | Serial Clock |
| 9 | CS | Chip Select |
| 10 | RESET | Reset pin |
| 11 | IOVCC | I/O POWER SUPPLY |
| 12 | IOVCC | I/O POWER SUPPLY |
| 13 | VCC | POWER SUPPLY |
| 14 | VCC | POWER SUPPLY |
| 15 | GND | Ground |
| 16 | GND | Ground |
| 17 | NC | NC |
| 18 | NC | NC |
| 19 | NC | NC |
| 20 | NC | NC |
| 21 | NC | NC |
| 22 | NC | NC |
| 23 | LEDA | BACKLIGHT ANODE |
| 24 | LEDA | BACKLIGHT ANODE |
DC Characteristics
| Item | Symbol | Min | Typ | Max | Unit |
| TFT gate on voltage | VGH | — | 15 | — | V |
| TFT gate off voltage | VGL | — | -10 | — | V |
| TFT common electrode Voltage | Vcom | — | -1 | — | V |
Typical Operation Conditions
| Item | Symbol | Min. | Typ. | Max. | Unit |
| Analog Supply Voltage | VCI | 2.5 | 2.8 | 3.3 | V |
| Digital Supply Voltage | VDD | 2.5 | 2.8 | 3.3 | V |
| I/O Supply Voltage | IOVCC | 1.65 | 1.8/2.8 | 3.3 | V |
| Input High Voltage | VIH | 0.8*IOVCC | – | IOVCC | V |
| Input Low Voltage | VIL | 0 | – | 0.2*IOVCC | V |
| Output High Voltage | VOH | 0.8*IOVCC | – | – | V |
| Output Low Voltage | VOL | – | – | 0.2*IOVCC | V |
Backlight Circuit Characteristics – 1.54 inch tft lcd
| Item | Symbol | Min. | Typ. | Max. | Unit |
| LED Current | IB | — | 45 | 60 | mA |
| LED Voltage | Vf | 2.8 | 3.0 | 3.2 | V |
| CIE | X | 0.265 | 0.295 | 0.325 | |
| Y | 0.26 | 0.29 | 0.32 | ||
| Brightness of LCM | L | — | 390 | — | cd/m2 |
Reliability Test Items
| Test Item | Test Parameters | Key factors for determining test results |
| High temperature storage | 80±3 ℃，48H； | |
| Low temperature storage | -30±3 ℃，48H； | |
| High temperature storage | 70±3 ℃，48H； | Inspection after 2~4hours storage at roomtemperature, |
| Low temperature operation | -20±3 ℃，48H； | the sample shall be free from defects: |
| High temperature/humidity | 60℃±3 ℃,90%±3%RH ，48H； | 1.Air bubble in the LCD; |
| Thermal Shock | ~20℃/0.5h~+70℃/0.5h for a total 24 cycles； | 2.Non-display; |
| Vibration Test | Frequency 10Hz~55Hz~10Hz | 3.Glass crack; |
| Amplitude：1.5mm, X，Y，Z | ||
| direction for total 1H； | 4. The electrical | |
| (Packing condition) | ||
| ESD test | ±4KV, Human Body Mode, | characteristics requirements shall be satisfied. |
| 150pF/330Ω； | ||
| ±8KV, Air Mode, 150pF/330Ω； |
Search keyword: tft 1.54″, 1.54 tft lcd, 1.54″ tft lcd, 1.54 inch tft lcd, tft lcd 1.54, 1.54 tft display, 1.54″ tft display, 1.54 inch tft display, tft display 1.54, tft display 1.54″,tft lcd display,1.54inch lcd screen,1.54inch display screen,small tft ips,small tft lcd,small screen,
