DESCRIPTION
HC-130HI1202A is a 1.3 inch tft lcd display screen with optional resistive touch screen and capacitive touch screen control, with a resolution of 240×240 pixels. This small size TFT LCD monitor is in portrait mode, TFT Panel adopts IPS panel, left: 80/right: 80/up: 80/down: 80 degrees.Optional RTP or CTP.
This HC-130HI1202A inch module has built-in ST7789V controller IC, supports SPI interface, power supply voltage (VCC) range is 3.0V to 3.6V, brightness is 320 nits (typ), and contrast ratio is 800:1. This module is an industrial Ideal for controls, coffee machines, medical equipment and more. The module can operate from -20°C to +70°C; its storage temperature range is -30°C to +80°C.
DRAWING
SPECIFICATIONS
General Specifications – 1.3 inch tft
| Item | Contents | Unit |
| Size | 1.3 | inch |
| LCM Dimension | 26.20（W）* 29.22（H） *2.0(T) | mm |
| LCD Active Area | 23.40* 23.40 | mm |
| Number Of Dots | 240×240 | pixel |
| LCD Type | a-Si TFT | |
| Viewing Direction | IPS | |
| Driver IC | ST7789V | |
| Interface Type | SPI | |
| Operating Temperature | -20℃~ 70℃ | |
| Storage Temperature | -30℃~ 80℃ | |
| Backlight Type | 2 LEDs | |
| Brightness | 320 | cd/m2 |
Interface
LCM PIN Definition
| NO. | Symbol | Description |
| 1 | GND | Ground |
| 2 | LEDK | Backlight cathode. |
| 3 | LEDA | Backlight anode. |
| 4 | VDD | POWER SUPPLY |
| 5 | GND | Ground |
| 6 | GND | Ground |
| 7 | D/C | Destination register selection. |
| 8 | CS | Chip Select |
| 9 | SCL | Serial Clock |
| 10 | SDA | Serial Data Input |
| 11 | RESET | Reset pin |
| 12 | TE | Frame mark. |
DC Characteristics
| Item | Symbol | Min | Typ | Max | Unit |
| TFT gate on voltage | VGH | — | 12 | — | V |
| TFT gate off voltage | VGL | — | -8 | — | V |
| TFT common electrode Voltage | Vcom | — | -1 | — | V |
Typical Operation Conditions
| Item | Symbol | Min. | Typ. | Max. | Unit |
| Analog Supply Voltage | VCI | 2.5 | 2.8 | 3.3 | V |
| Digital Supply Voltage | VDD | 2.5 | 2.8 | 3.3 | V |
| I/O Supply Voltage | IOVCC | 1.65 | 1.8/2.8 | 3.3 | V |
| Input High Voltage | VIH | 0.8*IOVCC | – | IOVCC | V |
| Input Low Voltage | VIL | 0 | – | 0.2*IOVCC | V |
| Output High Voltage | VOH | 0.8*IOVCC | – | – | V |
| Output Low Voltage | VOL | – | – | 0.2*IOVCC | V |
Backlight Circuit Characteristics
| Item | Symbol | Min. | Typ. | Max. | Unit |
| LED Current | IB | — | 30 | 40 | mA |
| LED Voltage | Vf | 2.8 | 3.0 | 3.2 | V |
| CIE | X | 0.265 | 0.295 | 0.325 | |
| Y | 0.26 | 0.29 | 0.32 | ||
| Brightness of LCM | L | — | 320 | — | cd/m2 |
Reliability Test Items
| Test Item | Test Parameters | Key factors for determining test results |
| High temperature storage | 80±3 ℃，48H； | |
| Low temperature storage | -30±3 ℃，48H； | |
| High temperature storage | 70±3 ℃，48H； | Inspection after 2~4hours storage at roomtemperature, |
| Low temperature operation | -20±3 ℃，48H； | the sample shall be free from defects: |
| High temperature/humidity | 60℃±3 ℃,90%±3%RH ，48H； | 1.Air bubble in the LCD; |
| Thermal Shock | ~20℃/0.5h~+70℃/0.5h for a total 24 cycles； | 2.Non-display; |
| Vibration Test | Frequency 10Hz~55Hz~10Hz | 3.Glass crack; |
| Amplitude：1.5mm, X，Y，Z | ||
| direction for total 1H； | 4. The electrical | |
| (Packing condition) | ||
| ESD test | ±4KV, Human Body Mode, | characteristics requirements shall be satisfied. |
| 150pF/330Ω； | ||
| ±8KV, Air Mode, 150pF/330Ω； |
Search keyword: tft 1.3″, 1.3 tft lcd, 1.3″ tft lcd, 1.3 inch tft lcd, tft lcd 1.3, 1.3 tft display, 1.3″ tft display, 1.3 inch tft display, tft display 1.3, tft display 1.3″,tft lcd display,1.3inch lcd screen,1.3inch display screen,small tft ips,small tft lcd,small screen,
